Sam4s ER-285M - System Option Table

SAM4s ER-285M Operator's and Program Manual v1.4 Program Mode Reference Guide • 139
System Option Table
Address SYSTEM OPTION VALUE = SUM
Beeper is active?
Yes = 0
No = 1
MCR CLERK SIGN
Yes = 2
No = 0
1
% affects net sale? Yes = 0
No = 4
2
Clerk sign on method is:
Direct entry =
Code entry =
0
1
3
Clerks are:
Pop-up =
Stay down =
1
0
Drawer needs to be shut to operate?
Yes = 0
No = 1
4
Activate open Drawer Alarm?
Yes = 2
No = 0
5
The number of seconds before the open drawer
warning tone sounds (Default is 30 seconds).
1-99
Allow the post tender function?
Yes = 1
No = 0
Open drawer on post tender?
Yes = 0
No = 2
6
Allow multiple receipts?
Yes = 4
No = 0
Cash Declaration Required before Z Financial
report?
Yes = 1
No = 0
7
Allow negative balance sales in the X control
lock position only?
Yes = 2
No = 0
Allow zero balance sales in the X control lock
position only?
Yes = 1
No = 0
8
Consecutive number is reset after a financial
report?
Yes = 2
No = 0
Reset Grand Total after Z financial Report?
Yes = 1
No = 0
Cash drawer will open when reports are run?
Yes = 0
No = 2
9
Open drawer during training mode?
Yes = 0
No = 4
10
Decimal place: (0,1,2,3) default=2 0-3
11
Date format is:
MMDDYY =
DDMMYY =
YYMMDD =
0(default)
1
2
12
Percentage and Tax
calculations will:
Round up at 0.005 =
Always round up =
Always round down =
0(default)
1
2