Sam4s ER-285M - Machine Number Programming

SAM4s ER-285M Operator's and Program Manual v1.4 Program Mode Reference Guide • 195
Machine Number Programming
The machine number is printed on the register receipt. Program a machine number so that any
receipt can be identified with the store or register where the transaction took place.
Programming the Machine Number
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 6 0 0, press the SUBTOTAL key.
0
SUB
TOTAL
0 6 1
1. Enter a machine number (up to 5 digits); press the X/TIME key.
X/TIME
4. Press the CASH key to finalize the program.
CASH