Sam4s ER-285M - Tendering a Check Sale; Totaling a Charge Sale

34 • Quick Start Guide SAM4s ER-285M Operator's and Program Manual v1.4
Tendering a Check Sale
1. Register the items you wish to sell.
2. To display the subtotal of the sale
including tax, press SUBTOTAL:
SUB
TOTAL
3. Enter the amount of the check tendered
by the customer. For example, for
$20.00 enter:
0 0 0 2
4. Press CHECK:
CHECK
5. The display will read “CHANGE”, the
drawer will open and the receipt will
print as in the example on the right.
DATE 03/09/2007 FRI TIME 01:32
PLU1 T1 $2.99
PLU1 T1 $2.99
4X @ 1.99 $1.99
PLU2 $7.96
TAX1 $0.36
TOTAL $14.30
CHECK $20.00
CHANGE $5.70
CLERK 1 NO.000011 00001
Totaling a Charge Sale
1. Register the items you wish to sell.
2. To display the subtotal of the sale
including tax, press SUBTOTAL:
SUB
TOTAL
3. Press CHARGE:
CHARGE
4. The display will read “CHARGE1”, the
drawer will open and the receipt will
print as in the example on the right.
Note: Charge tendering is not allowed
without changing the Charge key options.
DATE 03/09/2007 FRI TIME 01:32
PLU1 T1 $2.99
PLU1 T1 $2.99
4X @ 1.99 $1.99
PLU2 $7.96
TAX1 $0.36
TOTAL $14.30
CHARGE $14.30
CLERK 1 NO.000011 00001