Sam4s ER-285M - Program 801 - Drawer Assignment & Training Clerk

176 • Program Mode Reference Guide SAM4s ER-285M Operator's and Program Manual v1.4
Program 801 - Drawer Assignment & Training Clerk
1. Turn the control lock to the PGM position.
2. To begin the program, enter 8 0 1, press the SUBTOTAL key.
1
SUB
TOTAL
0 8
3. Enter the number of the clerk you wish to program; press the X/TIME key.
X/TIME
4. Enter an option digit from the table below, press the SUBTOTAL key.
Address OPTION VALUE = SUM
N1
Drawer assignment:
(0: default drawer, 1: no drawer)
0-1
N2
Training Mode Clerk Yes = 1
No = 0
N2 SBTLN1
5. Repeat from step 3 for each clerk you wish to program. Press the CASH key to
finalize the program.
CASH