72 • Operator Reference Guide SAM4s ER-285M Operator's and Program Manual v1.4
Waste
The WASTE key allows control of inventory by accounting for items that must be removed
from stock due to spoilage, breakage or mistakes. Press the WAS TE key before entering
wasted items, and then press the WAS TE key again to finalize. The WASTE key may be
under manager control, requiring the control lock to be in the X mode position. The WASTE
key is not allowed within a sale.
1. Press the WAS TE key. The message
"WASTE" displays at the top of the
screen.
WASTE
2. Enter the item or items that are wasted.
3. Press the WAS TE key again to total the
wasted items:
WASTE
DATE 01/10/2007 WED TIME 08:33
***WASTE***
PLU1 $1.25
PLU2 $1.50
***WASTE***
TOTAL $2.75
CLERK 1 NO.000011 00001
To Next Page
Loading...
