Sam4s ER-285M - Page 182

182 • Program Mode Reference Guide SAM4s ER-285M Operator's and Program Manual v1.4
Programming Group Descriptors
1. Turn the control lock to the PGM position.
2. To begin the program, enter 9 1 0, press the SUBTOTAL key.
0
SUB
TOTAL
1 9
3. Enter the number of the group you wish to program; press the X/TIME key.
X/TIME
4. If you are programming using alpha overlay;
SUB
TOTAL
Type up to 18
descriptor keys
or,
Enter up to 18
three-character
codes
SUB
TOTAL
5. To program additional groups, repeat from step 3, or press the CASH key to
finalize the program.
CASH