Sam4s ER-285M - Page 28

28 • Quick Start Guide SAM4s ER-285M Operator's and Program Manual v1.4
To Set the Preset Price/HALO
1. Turn the control lock to the PGM position.
2. To begin the program, enter 2 0 0, press the SUBTOTAL key.
0
SUB
TOTAL
0 2
3. Select the PLU you wish to program in one of the following ways:
• Press a PLU key on the keyboard, or
1
• Enter the PLU # (up to15-digits) and press the PLU key
PLU
Enter the PLU#,
up to 15 digits
4. If the PLU is open, enter a HALO of up to 7 digits. If the PLU is preset, enter a
preset price.
X/TIME
Price/HALO
5. To program additional PLUs, repeat from step 3, or press the CASH key to
finalize the program.
CASH