Sam4s ER-430 SERIES - ER-380;M, ER-390 M, ER-420 M, ER-430 M, ER-52 Xx;M Memory All Clear (RAM All Clear)

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Service Mode Programming • 113
ER-380/M, ER-390M, ER-420M, ER-430M, ER-52xx/M Memory All
Clear (RAM All Clear)
To Perform a Memory All Clear (reset memory completely - all other
models):
1. Turn the power switch located on the right side of the register to the OFF position.
2. Turn the control lock to the S-Mode (one passed PGM-Mode as a hidden position).
3. Press and hold the button position where the CHECK button (circled button) is located
on the default keyboard layout.
4. Continue to hold the CHECK button while turning the power switch to the ON position.
5. After hear BEEP, release the CHECK button.
6. Please see below for detail of each model:
For ER-380 and ER-380M, press the upper left button (FEED) of the keyboard, then
the lower left button (#/NS), then the upper right button (PLU 16), and finally press
the lower right button (CASH).
2
O
6
K
2
3
B
CANCEL
1
H
VOID
E
RETURN
S
10
Y
CHECK
SUB
TOTAL
5
P
7
L
3
6
C
%1
4
I
MOD 1/
SHIFT
F
RECEIPT
On/Off
T
11
Z
15
W
13
Space
00
N
5
J
1
Dbl Size
.
A
#/NS
0
CLEAR
D
PLU
R
9
CASH
8
Q
8
M
4
9
FEED
7
X/TM
G
CLERK
U
12
Y
16
X
14
For ER-390M, press the upper left button (PLU 1)of the keyboard, then the lower left
button (PLU 6), then the upper right button (CLERK #), and finally press the lower
right button (CASH).
27 45 39 33 3 21 15 9 51 VOID 57
26 44 38 32 2 20 14 8 50 C/CONV 56
28 46 40 34 4 22 16 10 52
52 43 37 31
1
19 13 7 49
PAPER
FEED
55
RETURN 58
29 47 41 35 5 23 17 11 53
ERROR
CORR
59
30 48 42 36
6
24 18 12 54 CANCEL 60
8 7
PLU CLEAR
RECD
ACCT
#/NS
5 4
2 1
00 0
CHARG E
9
%1 X/TIME
CLERK
#
PAID
OUT
CHE CK
6
SBTL
3
CASH
•