Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Introduction • 5
Using Status Charts
Similar to Option Tables, Status Charts similar job. Below shows one of the options in the PLU
Status Charts:
Address Program Option
Value
= Sum
N5
PLU keeps inventory?
Yes = 1
No = 0
a
a
+
b
+
c
PLU is inactive?
Yes = 2
No = 0
b
PLU is scalable? (Also make N6-1)
Yes = 4
No = 0
c
ÚDefault values have been highlighted in bold print
The difference with the Status Chart is that the Address is a string of numbers. The PLU Status Chart
Address is a nine (9) digit number.
When N# is the Address number, the example above shows the fifth digit (N5) in the Address. Each
SUM value in the Address is calculated in the same way as the Option Tables. For example above,
when all three sub-options of N5 are all No, N5 equals 0 + 0 + 0 = 0
The factory default status for a PLU is Preset Price (N1-1 is Yes, equals 0), Overridable Preset
Price (N1-2 is Yes, equals 0), and GST (N1-3 is Yes, equals 4), for N1, which is 0 + 0 + 4 = 4. The
rest of Addresses in the status is all preset to 0. Therefore, the status from N1 to N9 is
4 0 0 0 0 0 0 0 0.
N3 N2 N1 N4 N5 N6 N7 N8 N9
To Next Page
Loading...
