Sam4s ER-430 SERIES - Program 350 - PLU Link Programming

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 153
Program 350 - PLU Link Programming
PLU link programming allows you to link a PLU to another PLU, so that registration of the first PLU
will automatically trigger registration of the linked PLU. For example, you may wish to link a bottle
deposit with the sale of beverages, or you may wish to register a group of items normally sold
together.
Programming PLU Link
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 3 5 0, press the SUBTL key.
3. Select the PLU you wish to program in one of the following ways:
• Press a PLU on the keyboard, or
• Enter up to 15 digit number of the PLU and press the PLU key, or
• For a barcode item, scan the barcode. (Only for single item.)
4. Enter the number of the PLU you wish the PLU linked to; press the PLU key. Or press
the PLU key on the keyboard you wish the PLU linked to.
or,
If you want to unlink,
5. To program additional PLU Link, repeat from step 3, or press the CASH key to finalise
the program.
PLU
Enter the PLU#,
up to 15 digits
PLU
PLU
Enter the PLU#,
up to 15 digits
PLU
0 SUBTL5 3
CASH
0 PLU