Sam4s ER-430 SERIES - Validation; VOID (Void Previous Item)

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 209
VALIDATION
Options - Program 70 (PGM-Mode)
Address OPTION VALUE = SUM
N1
Enter Port Number. Enter 0 (zero) if validation is not
used. (0-2; except ER-380: (0-1))
0
N2
Key is inactive?
Yes = 1
No = 0
Allow multiple validations?
Yes = 2
No = 0
ÚDefault values have been highlighted in bold print
Descriptor - Program 80 (PGM-Mode)
- Refer to “Program 80 - Function Key Descriptor”
VOID (Void Previous Item)
Options - Program 70 (PGM-Mode)
Address OPTION VALUE = SUM
N1
Key is inactive?
Yes = 1
No = 0
ER-3xx
ER-4xx
ER-52xx
Key is active in X control lock position
only?
Yes = 2
No = 0
ER-230
Reserved
Validation is compulsory?
Yes = 4
No = 0
ÚDefault values have been highlighted in bold print
Descriptor - Program 80 (PGM-Mode)
- Refer to “Program 80 - Function Key Descriptor”
HALO - Program 90 (PGM-Mode)
- Refer to “Program 90 - Function Key HALO”
VOID CASH
Repeat for another function key
N1 SUBTL 0 7
VALID CASH
Repeat for another function key
N1 SUBTL 0 7 N2