Sam4s ER-430 SERIES - KBD SHIFT (ER-420 M Only)

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 213
KBD SHIFT (ER-420M only)
Options - Program 70 (PGM-Mode)
Address OPTION VALUE = SUM
N1
KBD Shift is:
Pop up 0
Stay
down
1
Key is active in X control lock position only?
Yes = 2
No = 0
ÚDefault values have been highlighted in bold print
Descriptor - Program 80 (PGM-Mode)
- Refer to “Program 80 - Function Key Descriptor”
HALO - Program 90 (PGM-Mode)
This will enable the shift to move the PLU on the NLU by this number. I.e. If NLU has
PLU#1 and you program X = 12 above, the KBD Shift will put PLU #13 on keyboard level
2, and PLU #25 on Shift 3. The maximum number for X is 18.
KBD SHIFT CASH X SBTL 0 9
KBD SHIFT N1 SUBTL 0 7
Repeat for another function key
CASH