Sam4s ER-430 SERIES - Programming a Descriptor for Keyboard Plus

44 • Getting Started Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
Programming a Descriptor for Keyboard PLUs
NOTE: On Sam4S ECRs, Descriptor Programming Method has been preset to Descriptor
Overlay. Please refer to Introduction - Basic Function and Feature - Keyboards to find
out the alpha overlay for your register model.
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 3 0 0, press the SUBTL key.
3. Press a PLU key on the keyboard.
4. Enter up to 18 / 12 (ER-230) character for the descriptor.
5. To program additional PLU Descriptor, repeat from step 3, or press the CASH key
to finalise the program.
CASH
PLU
3 0 0 SUBTL
Type up to 18 / 12 (ER-230)
descriptor keys
X/TIME