Sam4s ER-430 SERIES - Program 910 - Group Descriptors Programming

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 223
Program 910 - Group Descriptors Programming
Program descriptions by typing description on the alpha keyboard overlay or by entering three digit
alpha character codes. To descript by three digit alpha character codes you must select ‘No’ in
system option #25(for ER-3xx Series)/#30(for ER-230, ER-4xx and ER-52xx Series) (See
“System Option Programming). Also see Descriptor Programming Methods for Alpha Overlay
and/or Descriptor Code Table.
Programming the Group Descriptor
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 9 1 0, press the SUBTL key.
3. Enter the number of the group you wish to program; press the X/TIME key.
4. If you are programming using alpha overlay, type up to 18 descriptors on the overlay
and press the SUBTL key,
or,
If you are programming using descriptor codes, enter up to 18 three-digit character codes
and press the SUBTL key.
5. To program additional groups, repeat from step 3, or press the CASH key to finalise the
program.
CASH
Type up to 18 / 12 (ER-230)
descriptor keys
SUBTL
SUBTL
Enter up to 18 / 12 (ER-230)
three-character codes
0 SUBTL1 9
X/TIME