Sam4s ER-430 SERIES - Program 800 - Secret Code Programming

218 • Program Mode Programming Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
Program 800 - Secret Code Programming
Programming the Clerk Secret Code
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To begin the program, enter 8 0 0, press the SUBTL key.
3. Enter the number of the clerk you wish to program; press the X/TIME key.
4. Enter a secret code (up to 6 digits); press the SUBTL key.
5. To program additional Clerk Secret Code, repeat from step 3, or press the CASH key
to finalise the program.
CASH
SUBTL
Enter the secret code,
up to 6 digits
X/TIME
0 SUBTL0 8