Sam4s ER-430 SERIES - Program Scans; Program 15 - Program Scans

Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU Program Mode Programming • 239
Program Scans
Since much time and energy has been invested in the planning and programming of your Sam4S ER-
230, ER-3xx, ER-4xx and ER-52xx Electronic Cash Registers, it is advisable to print a hard copy of
the final program for future reference. This copy should be kept in a safe place.
Program 15 - Program Scans
1. Turn the control lock to the PGM-Mode.
Switch to P Mode by press MODE function key. (For ER-230)
2. To print a program scan, enter 1 5, press the SUBTL key.
3. In this step, there are three different ways to scan program information. One is PLU, the
other is Macro, and the third is Others.
PLU PROGRAM SCAN
• Press a PLU key on the keyboard and press same key again.
• To read single PLU program information, enter the number (1-1000) of the PLU and
press the same number and PLU key.
• Press a PLU key on the keyboard.
• To read multiple PLU program information, enter the first number (1-1000) and press
PLU key. Press the last number (1-1000) and press PLU key
MACRO PROGRAM SCAN
• To read MACRO information, press the MACRO key to be scanned, to scan different
MACRO key, please repeat this step,
PLU 1 PLU 1
5
SUBTL 1
PLU 1 PLU 10
MACRO
PLU
Enter the PLU#,
up to 15 digits
Enter same PLU#,
up to 15 digits
PLU
PLU
Enter the first PLU#,
up to 15 digits
Enter the last PLU#,
up to 15 digits
PLU