Sam4s ER-430 SERIES - Page 130

120 • Service Mode Programming Sam4S 230, 3xx, 4xx, 52xx Electronic Cash Register AU
4. Enter the Number to allocate for the Memory Item and Press CASH key.
See the example data table below
MEMORY ITEM N
PLU
50 (Max. 5000 for ER-230)
300 (Max. 5,000 for ER-3xx)
1,000 (Max 9,000 for ER-4xx)
1,000 (Max 15,000 for ER-52xx)
CLERK
5 (Max.99 for ER-230)
15 (Max. 99 for ER-3xx, ER-4xx, and ER-52xx)
GROUP
5 (Max. 99 for ER-230 EPROM v1.002 and earlier)
20 (Max. 99) => for ER-230 EPROM v1.003 and later and ER-
3xx, ER-4xx and ER-52xx)
CHECK # *
(For ER-3xx) 15
(For ER-4xx and ER-52xx) 20
(Max. 500)
SOFT CHECK LINE *
(For ER-3xx) 30
(For ER-4xx and ER-52xx) 50
(Max. 100)
CHECK TYPE *
0 (Soft Check), 1 (Hard Check)
PRICE LEVEL
1 (Max. 2)
MIX AND MATCH
10 (Max. 100)
ELECTRONIC JOURNAL
3000 (300 EPROM v1.002 and earlier) (Max. 12000 for ER-230)
3000 (Max. 15000) (for ER-3xx)
ÚDefault values have been highlighted in bold print * Not Applicable on ER-230
5. If you want to finish memory allocation, press CASH key again with no numeric key input. If
you want to allocate another memory area, repeat step 3 and 4.
CASH
CASH
N