Samsung CLX-9250ND - Thermistor

3. Replaceme
n
Perform the following procedure to remove the Therm
3.5.2 Thermistor
1. Take off the Bracket fuser top [A] after removing 4
s
CAUTION
2. Take off the thermistor assembly after removing 2 sc
CAUTION
When removing 2 screws pointed by the
a
CAUTION
Be careful not to bend the thermistor.
NOTE
Contact type NTC thermistors work in NON-CO
N
fbltf
Service Manual
CLX-9250/9350 series
3-
3
f
user
b
e
lt
sur
f
ace.
n
t Procedures
istor from the Fuser Unit.
s
crews.
[A]
rews.
a
rrow, be careful not to damage in harness
CAUTION
Observe precautions
For handling
Electrostatic
Sensitive
Devices
N
TACT conditions. They must not touch
SAMSUNG ELECTRONICS
3
0