Samsung CLX-9250ND - Exit Drive Unit

3. Replaceme
n
This section contains the procedures for disassemblin
g
To remove the Exit Drive Unit, perform the following p
r
3.11 Exit drive unit
1. Open the engine/video shield door.
2. Remove fuser out fan and duplex fan.
3. Remove exit drive unit after removing 3 screws and
3111F ser/E itdri emotor
Perform the following procedure to remove the Fuser/
E
To remove the motor, remove 4 screws and 1 connect
o
3
.
11
.
1
F
u
ser/E
x
it
dri
v
e
motor
Service Manual
CLX-9250/9350 series
3-
7
n
t Procedures
g
the Exit Drive Unit components of the printer.
r
ocedure.
all connectors.
E
xit Drive Motor from the Exit Drive Unit.
o
r.
SAMSUNG ELECTRONICS
7
9