Samsung CLX-9250ND - Ozone Filter FAN

3. Replaceme
n
3.7.13 Ozone filter Fan
Perform the following procedure to remove the Ozone
1. Remove the DC control board shield. (Refer to 3.7.
9
2. Take off the Ozone filter [A].
3. Remove the 4 screws.
4. Release the harness from the holder.
5. Take off the ozone filter fan.
Service Manual
CLX-9250/9350 series
3-
6
n
t Procedures
Filter Fan from the printer.
9
)
[A]
SAMSUNG ELECTRONICS
6
9