Samsung CLX-9250ND - Fuser NIP Motor

3. Replaceme
n
3.5.3 Fuser NIP motor
1. Remove 2 screws from the fuser right. Take off the h
a
[A]
2. Release the pin connector with the tweezers.
Service Manual
CLX-9250/9350 series
3-
3
n
t Procedures
a
rness holder [A].
CAUTION
When reassembling this, be careful not to
damage in harness.
Red
/Blue
CAUTION
When reassembling the pin connector, make
sure the colors are positioned as shown above.
Check the connector assembly status
Check
the
connector
assembly
status
.
If there is a wrong connection, a operation
error or a fire can happen.
Be careful not to bend the connector.
SAMSUNG ELECTRONICS
3
1