Samsung CLX-9250ND - Smps Fan

3. Replaceme
n
3.7.12 SMPS Fan
Perform the following procedure to remove the SMPS
[A]
[B]
Service Manual
CLX-9250/9350 series
3-
6
n
t Procedures
1. Remove the rear cover.
(
refer to 3.2.4
)
Fan from the printer.
()
2. Remove the 6 screws from the SMPS box.
3. Unplug 2 connectors from DC power PBA.
4. Unplug the connector from the fan you want to
replace.
SAMSUNG ELECTRONICS
6
7