Samsung CLX-9250ND - Adjustment Conditions

2. Product
d
2.7.4.1 Sub Scan Line Position for C
M
The adjustment of the sub-scan line position for CMY
The printer measures the gaps between the lines of e
a
gaps for a color are not correct, the printer moves the
do this, it changes the laser write timing for that color.
2.7.4.2 Main Scan Line Position for
C
When the printer detects that the image is out of posit
i
write start timing for each scan line.
2743 M ifi ti Adj t t f
2
.
7
.
4
.
3 M
agn
ifi
ca
ti
on
Adj
us
t
men
t f
o
r
When the printer detects that magnification adjustme
n
the required color.
2.7.4.4 Skew for CMY
The adjustment of the skew for CMY is based on the l
2.7.4.5 Adjustment Conditions
Line position adjustment can be turned on or off. How
fnction
f
u
nction
.
Line position adjustment timing depends on several s
e
• ∆t = Elapsed Time.
•
∆
T = Temperature change of LSU (Laser Scannin
g
• position adjustment and the current tempera
t
• Pages = Total printed pages after previous line po
s
2.7.4.6 Initial Adjustments
Line position adjustment starts automatically after war
printer recovers from energy saver mode. Line positio
n
these conditions occurs:
• ∆t (Power On) > Time threshold (default: 10 minu
t
• ∆t (Wakeup) > Time threshold (default: 18 minute
s
Service Manual
CLX-9250/9350 series
2-
4
d
escription
M
Y
is based on the line position for K (color registration).
a
ch color in the pattern on the transfer belt. When the
image of the color up or down the sub scan axis. To
C
MY
i
on in the main scan direction, it changes the laser
CMY
r CMY
n
t is necessary, it changes the LD clock frequency for
ine position for K.
ever, it is normally recommended to turn on this
e
ttings. These settings include the following:
g
Unit) between the temperature of the previous line
t
ure.
s
ition adjustment.
ming up when the power is turned on, or when the
n
adjustment is automatically performed when one of
t
es)
s
)
SAMSUNG ELECTRONICS
4
7