Samsung CLX-9250ND - Information

4.Servi
c
4.3 Information
4.3.1. General
•
Information > General
This menu displays the machine’s serial number, as
s
call, and the day of first service.
4.3.2. Supply Status
•
Information
>
General
4.3.2.1. Customer Re
p
lacement Unit
(
• Information > Supply Status > Customer Re
p
p(
4.3.2.2. Field Replacement Unit (FRU
)
This menu displays the machine’s customer replace
m
to check the information of the selected unit.
• Information > Supply Status > Field Replac
e
This menu displays the machine’s field replacement
check the information of the selected unit.
In the CRU and FRU list, there are four columns : ite
• Item : Refer to the table below.
•
Status : This shows the current status of the select
Status
:
This
shows
the
current
status
of
the
select
• OK : The current count is smaller than the
d
• Check : The current count is bigger than d
e
• Off : The current count exceeds the max lif
e
• Count : This shows the current count of the selecte
d
• Max. life : This shows the max capacity of the sele
c
Users can edit the default warning value within the g
i
Selecting some items will enable the reset button to r
Selecting
some
items
will
enable
the
reset
button
to
r
Unit Item Max.
Toner
Yellow 20K / 1
5
Magenta 20K / 1
5
Cyan 20K / 1
5
Black 25K
Imaging Unit
Yellow 75K
Magenta 75K
Cyan 75K
Service Manual
CLX-9250/9350 series
Black 75K
4
-
c
e Mode
s
igned IP address, printed impressions since last
(
CRU
)
p
lacement Unit
()
)
m
ent unit status. Users can select one item in the list
e
ment Unit
unit status. Users can select one item in the list to
ms, status, current, max life.
ted item.
ted
item.
d
efault warning value
e
fault warning value
e
.
d
item.
c
ted item.
i
ven threshold.
reset the current count to 0 after replacing the unit
reset
the
current
count
to
0
after
replacing
the
unit
.
Life
Default
Warning Value
Threshold
5
K 10% 5 ~ 30%
5
K 10% 5 ~ 30%
5
K 10% 5 ~ 30%
10% 5 ~ 30%
10% 5 ~ 30%
10% 5 ~ 30%
10% 5 ~ 30%
SAMSUNG ELECTRONICS
10% 5 ~ 30%
-
6