A. Typical faulty images
7.3.16 Stain on the paper back side
B. Troubleshootin
Step Section Check item
1 Image
adjustment
Is the margin adjustment
image correct?
2 Paper feeding Does the size of paper in
drawer or LCF correspon
the setting?
32
nd
Transfer
roller
Are the feed roller and 2
n
transfer roller dirty or wor
4 Image Transfer
Belt (ITB)
Is there any stain caused
poor cleaning, etc. on the
transfer belt?
5 Is the transfer belt cleani
blade in proper contact w
transfer belt?
6 Is there any foreign matt
stain on the 2nd transfer
roller dirty?
8 Is the rib of transport gui
dirty?
Service Manual
CLX-9250/9350 series
7-1
hooting
Result Action
of No Adjust the margin and
magnifications
the
to
No Use the appropriate paper
size or correct the size
setting.
out?
Yes Clean or replace the rollers.
by a Yes Clean the transfer belt.
g
ith the
Yes Take off the transfer belt and
check if the transfer belt
cleaning blade pressure
spring and the pressure hook
are installed properly.
oller?
Yes Clean or replace the roller.
ssure Yes Clean the fuser belt and
pressure roller.
e Yes Clean the rib.
SAMSUNG ELECTRONICS
74