Samsung CLX-9250ND - Gear

3. Replaceme
n
3.5.7 Gear
[B]
Perform the following procedure to remove the Gear f
r
[C]
[A]
[D]
[E]
[D]
Service Manual
CLX-9250/9350 series
3-
3
n
t Procedures
1. Remove the motor (Refer to 3.5.3)
r
om the Fuser Unit.
2. Remove the shaft PR screw [A].
3. Push and release the DC Harness holder [B] in
the direction of arrow after removing 1 screw.
4. Remove the bracket [C] after removing 3 screws.
5. Remove the Gear Holder after removing 1 screw.
6R th
6
.
R
emove
th
e gears.
7. Remove the Gear after removing the E-ring with
the tweezers.
SAMSUNG ELECTRONICS
3
8