Samsung CLX-9250ND - DADF Adjustment

4.Servi
c
4.5.4.4. DADF Adjustment
• Diagnostics > Adjustment > DADF Ad
j
ustme
n
Purpose To correct image position and
m
automatically.
Operation
Procedure
1. Locate the Scanner A/S Ch
a
need to head to feeding dir
e
Scanner A/S Charts come i
n
meet your primary size of u
s
2. Press “OK” button. Autom
a
automatically calculate the
p
3. The new values are set to t
h
Verification 1. Copy the Scanner A/S Cha
r
2. To check the image positio
the chart to the copy.
3. To check the magnification,
copy .
Specification
ⓐ,ⓑ : 10 ±, 1.5mm
ⓒ : 190 ±, 1.5mm
Reference Figure 5-3
CLX-9250/9350 Series Service
Service Manual
CLX-9250/9350 series
4-
3
c
e Mode
n
t > Automatic Adjustment
m
agnification of scanned images via DADF
a
rt at the DADF. Note that “Lead Edge” arrows
e
ction and to be placed face up. Also note that the
n
two size, A4 and Letter . Choose one size to
s
e.
a
tic scanning will occur ,and the system will
p
roper value based on scanning result of the chart .
h
e table.
r
t. Scanning must be occur from the DADF.
n, compare the position of scale marks (ⓐ,ⓑ) of
compare the length of line ⓒ of the chart to the
Manual, Chapter 7.3.17 DADF skew testing
SAMSUNG ELECTRONICS
3
5