Samsung CLX-9250ND - OPE Controller

2. Product
d
The Image Controller (ICON) is used to compress an
d
images processing and transceiving relevant data to
a
Video Controller uses the PowerPC 1GHz, 1GB Mem
o
successfully. The Video Controller also communicate
Controller to display some of the system information.
The USB HUB Controller interfaces with the Video Co
such as USB memory sticks and Authentication devic
e
The OPE Controller displays the status of the system
b
actions or the Video controller.
The Scan Controller scans images using the Platen o
r
The DADF Controller controls some mechanisms req
u
communicates with the Scan Controller to synchroniz
e
the scanning data to the Video Controller through the
P
A
MICOM at the Engine Controller activates each con
t
optimized energy-saving algorithm for optimal efficien
c
side is used to safely shut down the system power. It i
Service Manual
CLX-9250/9350 series
2-
7
d
escription
d
decompress images for enhancing performance of
a
nd from the Video Controller through the PCIe. The
o
ry, and a 250GB HDD to perform these jobs
s with the OPE Controller through the USB HUB
ntroller, the OPE Controller, and some USB Devices
e
s such as Common Access Card readers.
b
y using the WSVGA TFT LCD in response to user
r
the DADF.
u
ired to scan by feeder continuously and
e
the scanning timing. The Scan Controller transfers
P
CIe high speed bus.
t
roller’s power and turns off power according to an
c
y. The soft Power Switch in the OPE Controller left-
s controlled by the MICOM.
SAMSUNG ELECTRONICS
7
0