Samsung CLX-9250ND - Main Drive Sensors

3. Replaceme
n
3.8.4 Main drive sensors
Perform the following procedure to remove the 4 Main
D
1. Remove the Main Drive PBA holder after removing
4
2. There are 4 identical sensors.
Remove the sensor that you want to replace by pus
h
remove the connector.
Hook
Connector
Service Manual
CLX-9250/9350 series
3-
7
n
t Procedures
D
rive Sensors from the Main Drive Unit.
4
screws and all of the connectors.
h
ing the hook to release the sensor from the holder and
SAMSUNG ELECTRONICS
7
4