Samsung CLX-9250ND - Scan Area Adjustment

4.Servi
c
4.5.4.3. Scan Area Adjustment
• Diagnostics > Adjustment > Scan Area Ad
j
u
s
Purpose To correct image position and
m
Operation
1.
Locate the Scanner A/S Cha
Operation
Procedure
1.
Locate
the
Scanner
A/S
Cha
arrows need to head to the
A
lso note that the Scanner
A
Choose one size to meet y
o
2. Press “OK” button. Autom
a
automatically calculate the
p
3. The new value set to the ta
b
Verification 1. Scan the Scanner A/S Cha
r
from the scan glass.
2. To check the image positio
the chart to the copy.
3. To check the magnification,
copy.
Specification
ⓐ,ⓑ : 10 , ± 1.5mm
ⓒ : 190 , ± 1.5mm
Reference Figure 5-3
Figure 5-3, A4 S
c
Service Manual
CLX-9250/9350 series
4-
3
c
e Mode
s
tment > Automatic Adjustment
m
agnification of scanned images automatically.
art at the scan glass . Note that
“
Lead Edge
”
art
at
the
scan
glass
.
Note
that
Lead
Edge
left side of scan glass and to be placed face down.
A
/S Charts come in two sizes, A4 and Letter .
o
ur primary size of use.
a
tic scanning will occur ,and the system will
p
roper value based on scanning result of the chart .
b
le.
r
t and send it to a PC. Scannin
g
must be occur
g
n, compare the position of scale marks (ⓐ,ⓑ) of
compare the length of line ⓒ of the chart to the
c
anner A/S Cart
SAMSUNG ELECTRONICS
3
3