Samsung CLX-9250ND - Page 395

7. Trouble
s
● Code :
C5-1531
● Error message :
ITB Unit Failure #C
5
● Symptom / Cause :
The machine can not detect the position movement o
f
● Troubleshooting method :
1. Check if the Engage Sensor is working normally.
2. If the sensor can not detect the engage operation,
c
If the connection is OK, replace the sensor.
3. If the sensor has no problem, check if the DC mot
o
4. If there is a any motor noise, replace the DC motor
A
● Replacement part
JC95-01056A : COVER-SIDE MOTOR DC
0604-001393 : PHOTO-INTERRUPTER
Service Manual
CLX-9250/9350 series
7-
5
s
hooting
5
-1531: Turn off then on.
f
the transfer roller 2 within the programmed time.
c
heck the harness connection.
o
r is working normally.
A
ssy.
SAMSUNG ELECTRONICS
5
5