Samsung CLX-9250ND - Page 436

7. Trouble
s
● Code :
S1-1413
● Error message
:
Video System Failu
r
● Symptom / Cause :
Printed image has a defect.
● Troubleshooting method :
1. When printing an engine test pattern, there is a im
a
Yes : Replace the engine board.
2. Check the connection between Engine board and
V
Reconnect or replace the harness.
3. Did you replace the HDD / Video board?
Yes : Update the firmware for the new board.
(Refer to chapter 5. Firmware update)
4. Does the problem occur after updating the firmwar
e
Yes :
A
. Print the configuration report and check the fi
r
B. If all software versions are not normal, updat
e
C. If the problem persists, replace the defective
d
5. Replace the Video board.
● Replacement part
- JC59-00031A : HDD
- JC92-02150A : PBA-MAIN (CLX-9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
Service Manual
CLX-9250/9350 series
7-
9
s
hooting
:
r
e #S1-1413 : Turn off then on.
a
ge defect on page.
V
ideo board.
e
?
r
mware version.
e
the firmware again.
d
evice. (HDD / Video board )
SAMSUNG ELECTRONICS
9
6