Samsung CLX-9250ND - Page 442

7. Trouble
s
● Code :
S1-2511
● Error message
:
MSOK System Fail
u
● Symptom / Cause :
Communication error between EEPROM and Video b
o
● Troubleshooting method :
1. Is the MSOK installed properly?
No : Install the MSOK properly.
2. If the problem persists, replace the Video board.
● Replacement part
- JC92-02150A : PBA-MAIN (CLX-9350ND)
- JC92-02235A : PBA-MAIN (CLX-9250ND)
Service Manual
CLX-9250/9350 series
7-1
s
hooting
:
u
re #S1-2511 : Turn off then on.
o
ard has occurred.
SAMSUNG ELECTRONICS
02