Samsung CLX-9250ND - Page 457

7. Trouble
s
● Code :
S2-3114
● Error message :
Engine System Fail
u
● Symptom / Cause :
A
CR error has occurred.
● Troubleshooting method :
1. Perform the ACR calibration manually.
2. Check if the ACR sensor is defective and connecto
r
3. Check the image density and the belt.
4. Replace the engine controller.
Engine board
●
Replacement part
●
Replacement
part
- JC32-00012A : PBA SENSOR ACR
- JC92-02129A : PBA-ENGINE (CLX-9350ND)
- JC92-02239A : PBA-ENGINE (CLX-9250ND)
Service Manual
CLX-9250/9350 series
7-1
s
hooting
u
re #S2-3114 : Turn off then on.
r
is connected properly.
SAMSUNG ELECTRONICS
17