Samsung CLX-9250ND - Page 468

7. Trouble
s
● Code :
U1-2115
● Error message
:
Fuser Unit Failure
#
● Symptom / Cause :
The toner on printed page is not fixed perfectly. (Fuse
It is difficult to remove a jammed paper or paper tears
● Troubleshooting method :
1. Turn the machine off and turn it on again.
2. When you open and close the side door, check if th
2.
When
you
open
and
close
the
side
door,
check
if
th
3. Enter the diagnostic mode. Execute the fuser pres
s
4. If the problem persists, check the following :
A. Turn the machine off.
B. Remove the fuser unit from the machine.
C. Remove the Frame-fuser rear of the fuser unit.
D. Check the connection of the fuser pressure moto
r
E. Rotate the warm gear located in the left of press
u
Check if the position of pressure roller moves and
F. Check if the fuser pressure motor is defective.
5. If the problem persists, replace the fuser unit.
● Replacement part
- JC31-00110B : MOTOR STEP
- JC91-00931A : FUSER (220V)
- JC91-00930A : FUSER (110V)
Service Manual
CLX-9250/9350 series
7-1
s
hooting
:
#
U1-2115 : Turn off then on.
r pressure error)
easily.
ere is a sound of the fuser pressure motor.
ere
is
a
sound
of
the
fuser
pressure
motor.
s
ure motor test.
r
.
u
re motor.
gears related to pressure rotates.
SAMSUNG ELECTRONICS
28