Samsung CLX-9250ND - Page 477

7. Trouble
s
● Code :
U3-3111
U3-3113
U3-3114
● Error message
:
Original paper jam i
n
Original paper jam i
n
Original paper jam i
n
● Symptom / Cause :
During a DADF job, the document on stacker does n
o
normal time.
● Troubleshooting method :
1. Check if the DADF pick up motor is working.
2. Open the DADF cover.
3. Remove the document on the Guide-Pick up Assy.
4. Check if there is any contamination on surface of p
i
Clean or replace the contaminated roller.
(Refer to maintenance chapter)
5. Check if the one-way bearing is assembled correct
l
The letter should be shown in external.
6. Find some obstruction in feeding path.
7. Close the DADF cover.
●
Replacement part
●
Replacement
part
- JC97-03779A : DADF Pick up/ ADF Roller
- JC97-03630A : DADF Retard Roller
Service Manual
CLX-9250/9350 series
7-1
s
hooting
:
n
front of scanner
n
front of scanner
n
front of scanner
o
t feed or doesn’t reach the feed sensor within a
i
ck-up / ADF / Retard roller.
l
y.
SAMSUNG ELECTRONICS
37