I
To
Select the Source
Use to select TV
or
other
external
input
sources
such
as DVD players
or
Cable Box/Satellite receivers (Set-Top
Box) connected
to
the Wireless Home
AV
Center. Use
to
select the
input
source
of
your
choice.
You can name the device connected
to
the
input
jacks
to
make
your
input
source
selection easier.
I
1 Press the MENU button
to
display the menu.
Press the
.&
or T button to select Input, then press the ENTER button.
2 Press the ENTER button to select Source List.
Press the
.&
or T button to select the signal source, then press the ENTER
button.
~
You
can
choose between the following sets of jacks:
AV1,
Component1,
Component2,
HDMI1
or HDMI2
on
the Wireless Home
AV
Center's rear
panel and
AV2,
S-Video or HDMI3
on
the Wireless Home
AV
Center's front
panel.
~
HDMI1, HDMI2 or HDMI3 input can only
be
selected when the external
device
is
turned
on
and connected via HDMI.
~
You
can
choose only those external devices that are connected to the
Wireless Home
AV
Center.
~
You
can
also
press
the
SOURCE
button
on
the
remote
control
to
view
an
external
signal
source.
To
Edit the Input Source Name
1 Press the MENU button to display the menu.
Press the
.&
or T button
to
select Input, then press the ENTER button.
Press the
.&
or T button
to
select Edit Name, then press the ENTER button.
2 Press the
.&
or T button
to
select
AV1, AV2,
S-Video, Component1,
Component2, HDMI1, HDMI2 or HDMI3 input jack, then press the ENTER
button.
3 Press the
.&
or T button to select VCR, DVD, D-VHS, Cable STB,
HD
STB,
Satellite STB, PVR STB,
AV
Receiver, DVD Receiver, Camcorder, DVD
Combo, VOD STB or TV input source, then press the ENTER button.
Press the EXIT button to exit.
.[
~
=
~
.
e£®
0-..,
---------~----~----~-----------
To Next Page
Loading...
