I
Viewing Closed Captions (On-Screen Text Messages) - Analog
The Analog Caption function operates in either analog
TV
channel mode
or
external signal mode. (Depending on
the broadcasting signal, the Analog Caption function may operate on digital channels.)
1 Press the
MENU
button
to
display the menu.
Press
the"
or T button
to
select Setup,
then
press the ENTER button.
2 Press
the"
or T button
to
select Caption, then press the ENTER button.
3 Press
the
ENTER button
to
select Caption.
Press
the"
or T button
to
select On, then press
the
ENTER button.
4 Press
the"
or T button
to
select Caption Mode, then press
the
ENTER
button. Press
the"
or T button
to
select submenu (CC1-CC4 or Text1-Text4)
you
want, then press the ENTER button.
Press the EXIT button
to
exit.
•
The
default
is
Default.
•
CC1:
The
Primary
Synchronous
Caption
Service.
These
are
captions
in
the
primary
language
that
must
be
in
sync
with
the
sound.
preferably
matched
to
a
specific
frame.
•
CC2:
The
Special
Non-Synchronous
Use
Captions.
This
channel
carries
data
that
is
intended
to
augment
information
carried
in
the
program.
•
CC3:
Secondary
Synchronous
Caption
Service.
Alternate
program-related
caption
data,
typically
second
language
captions.
•
CC4:
Special
Non-Synchronous
Use
Captions.
Similar
to
CC2.
• Text1:
First
Text
Service.
This
may
be
various
non-program
related
data.
• Text2:
Second
Text
Service.
Additional
data,
usually
not
program
related.
• Text3/Text4:
Third
and
Fourth
Text
Services.
These
data
channels
should
be
used
only
if
Text1
and
Text2
are
not
sufficient.
~
•
The
Caption feature doesn't work
in
COMPONENT, HDMI(DVI) modes.
•
The
availability of captions depends
on
the program being broadcast.
[J5J
You
can also press the CAPTION button
on
the remote control
to
select Captions
On
or
Off.
.....
-·---------~-----------11--·--
RETURN
tEO
CAPTION
@ 0 0
PMOOE
SMODE
STILL
pSIZ;"I1
______
..
JL.
__
To Next Page
Loading...
