Samsung FP-T5894W - Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your nearest dealer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
IWall Mount Kit Specifications (VESA)
B
Product Family
inches VESA Spec. (A * B)
Standard Screw Quantity
23 - 26
200 * 100
M4
32 -40
200 * 200
M6
46 - 52 600 * 400
LCD·TV
700 * 400
4
57
(No VESA)
M8
57 -70 800 * 400
80 -
1400 * 800
42 - 58
600 * 400
4
70
800 * 400
Plasma TV
I····
M8
......
63 No VESA 6
.
-
80 -
1400 * 800 4
};o> We provided the standard dimensions for wall mount kits as shown in the table above.
};o> When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are
provided.
};o> Do not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
};o> For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on their specifications.
};o> Do not use screws that do not comply with the VESA standard screw specifications.
};o> Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to
personal injury. Samsung is not liable for these kinds of accidents.
};o> Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used
or the consumer fails to follow the product installation instructions.
};o> Our 57" (700*400) and 63" models do not comply with VESA Specifications. Therefore, you should use our dedicated
wall mount kit for this model.
};o> Do not exceed 15 degrees tilt when mounting this TV.
Ji\ Do not install your Wall Mount Kit while your TV is turned on.
~ It may result in personal injury due to electric shock.