Option
2:
Setting the
Clock
Automatically
The
Clock
can be
set
automatically
if
you
are receiving a digital signal.
1 Press the MENU button
to
display the menu.
Press the A or " button
to
select Setup, then press the ENTER button.
Press the A or " button
to
select Time, then press the ENTER button.
2 Press the ENTER button
to
select Clock.
3 Press the ENTER button to select
Clock
Mode.
Press the A or " button
to
select Auto, then press the ENTER button.
4 Press the A or " button
to
select Time Zone, then press the ENTER button.
S Press the A or " button to highlight the time zone for your local area, then
press the ENTER button.
6 Press the A or " button
to
select DST (Daylight Saving Time), then press the
ENTER button.
Press the A or " button
to
select On or Off, then press the ENTER button.
Press the EXIT button
to
exit.
>-
Depending
on
the broadcast station and signal, the auto time may not
be
set
correctly. If this occurs, set the time manually.
>-
Antenna or Cable must
be
connected
in
order to set the time automatically.
Continued
...
To Next Page
Loading...
