161
4. Tap
Scan
. After scan, tap a device name to begin the
connection process to another Wi-Fi Direct compatible
device.
Note:
The target device must also have Wi-Fi Direct service
active and running before it can be detected by your
device.
5. Tap the on-screen entry. Once the recipient taps
Accept
, the direct connection is then established. The
status field now reads “Connected” and your
connected device is listed within the Wi-Fi Direct
devices listing.
To enable Share shot on Camera:
1. From the Home screen, tap
(
Camera
).
2. From the viewfinder screen, tap (
Settings
) ➔
Shooting mode
➔
Share shot.
To configure your Share Shot options:
Confirm the Share Shot viewfinder is active (see
below).
To Next Page
Loading...
