Machine status and advanced features_ 64
EMULATION
ITEM DESCRIPTION
Emulation Type The machine language defines how the com-
puter communicates with the machine.
If you select Auto,
your machine can change the
machine language automatically.
Setup You can set the detailed settings for the emula-
tion type you selected.
NETWORK
Refer to the Network Setup chapter of this User’s Guide for more informa-
tion on setting the network (see "Network setup" on page 34).
Select Form
a
Form overlay is images stored in the printer
hard disk drive (HDD) as a special file format
that can be printed in layers on any document.
• Select Form is not displayed when
Form Menu is set as Off.
• 2n
d Form is displayed when Form
Menu is set as Double Form.
HDD Spooling
a
To spool documents in HDD for the network
printing, select On.
Language This menu determines the language of the text
th
at appears on the control panel display and
information printing.
Default Paper Size You can set the default paper size to use.
Power Save When the machine does not receive data for an
exte
nded period of time, power consumption is
automatically lowered. You can set how long the
machine waits before going to power save
mode.
Auto Continue This menu determines whether or not the
ma
chine continues printing when it detects the
paper unmatched to your paper setting.
• Off: If paper mismatch occurs, the message
wil
l remain on the display and the machine
will remain off-line until you insert the correct
paper.
• On
: If paper mismatch occurs, an error
message will display. The machine will go
offline for 30 seconds, then automatically
clear the message and continue printing.
Altitude Adjustment You can optimize print quality according to your
altitude
.
Auto CR This menu allows you to append the required
carriage
return to each line feed, which is useful
to the Unix user or DOS user.
Job Timeout When there is no input for a certain period of
ti
me, the machine cancels the current job. You
can set the amount of time the machine will wait
before canceling the job.
Multi-Bin
b
• Mode: Select the multi-bin mode you want to
use.
• Default Bin: Select the bin to use as a
defaul
t.
Import Setting You can import data stored in the USB stick to
th
e machine (see "Restoring data" on page 61).
Export Setting You can export data stored in the machine to
the
USB stick (see "Backing up data" on
page 61).
Quiet Mode You can reduce the printing noise by turning this
me
nu on. However the printing speed and qual-
ity maybe declined.
ITEM DESCRIPTION
Eco Settings Eco mode is created to set the options that
reduce toner and paper usage.
• Default Mode: Select whether to turn the
Eco
mode on or off.
- On: Set the Eco mode on.
- Off: Set the Eco mode off.
- On
force: Set the Eco mode on with
password. If a user wants to turn the Eco
mode on/off, the user needs to enter the
password.
• Sel
ect Template: You can select the eco
template you set from the SyncThru™ Web
Service (see "Eco" on page 67).
Clear Settings This menu allows you to restore the machine’s
factory defaul
t settings.
a.This menu only appears when an optional hard disk drive (HDD) has
been installed.
b.You can only use this menu if you h
ave installed the optional finisher
or mailbox.
ITEMS DESCRIPTION
Ethernet Speed This menu allows you to select the ethernet
speed.
802.1x You can select the user authentication for network
co
mmunication. For details information consult the
network administrator.
TCP/IP(IPv4) Select appropriate protocol and configure parame-
ters to use the network environm
ent.
There are lots of parameters to be set; there-
fore, if you are not sure, leave as is, or con-
sult the network administrator.
TCP/IP(IPv6) Selects this option to use the
network environment
through IPv6.
Wireless
a
Configure the wireless network environments
ITEM DESCRIPTION
To Next Page
Loading...
