Troubleshooting_ 77
ate.
In the optional high capacity feeder
1. Open the cover of the optional high capacity feeder.
2. Remove the jammed paper by pulling in the direction shown. To avoid
tearing the paper, pull it out gently and slowly.
3. Close the optional high capacity feeder cover.
4. O
pen and close the top cover to resume printing.
If the top cover is not completely closed, the machine will not oper-
ate.
In the multi-purpose tray
Click this link to open an animation about clearing a jam.
1. If the paper is not feeding properly, pull the paper out of the machine.
2. Open and close the top cover to resume printing.
If the top cover is not completely closed, the machine will not oper-
ate.
Inside the machine
Click this link to open an animation about clearing a jam.
The fuser area is hot. Take care when removing paper from the
machine.
1. Open the top cover and pull the toner cartridge out.
To Next Page
Loading...
