Sanremo D8 - Description of the Machine

D8
Description
15
DESCRIPTION
3 DESCRIPTION OF THE
MACHINE
The D8 family belongs to the category of
Professional Machines for espresso cof-
fee production.
For coffee production it uses an innovati-
ve hybrid heating circuit that allows you
to adjust the coffee dispensing tempera-
ture directly on the dispensing group,
thus making it independent of the steam
boiler temperature.
The main structure of the machine is en-
tirely made of steel and can be divided
into three areas:
- the working area (1), located at the
front of the machine which always
includes:
∙ left-hand steam wand operated by
means of a mechanical tap;
∙ 2 to 3 espresso coffee dispensing
groups that are operated via the
push-button panels on top of the
group;
∙ hot water dispensing tap operated
via an electronic button;
∙ right-hand steam wand operated by
means of a mechanical tap;
∙ drain plate with support grid for
cups or work containers. This area
can be optionally equipped with
additional lighting to improve
visibility on the work surface.
- The cup storage area (2) located
above the machine always includes:
∙ cup containment system on three
sides;
∙ grids made of plastic material
suitable for contact with food to
support the cups;
∙ plate (inside the machine) for
collection of the water resulting
from the drying of the cups.
On request, the cup support plate
can be equipped with an additional
heating element to heat the cups.
- The area inside the machine (3), only
accessible to authorised maintenance
personnel.
1
2
3