Sanremo D8 - Hot Water Dispensing; Switch-Off and Eco Mode

D8
Operation
40
7.6 HOT WATER DISPENSING
For hot water dispensing, proceed as
follows:
- place the jug under the hot water outlet
pipe (1);
- press the water dispensing button (2)
once to dispense the first set dose;
- press the water dispensing button (2)
twice consecutively to dispense the
second set dose;
- press the water dispensing button (2)
again if you want to end the dispensing
before the set dose is reached;
2
1
- a countdown is shown on the the group
closest to the water tap to indicate
how much time is left until the end of
dispensing.
THERMAL HAZARD
In order to avoid the risk of
burns, do not press the button
for water dispensing before
placing the jug under the outlet
pipe.
7.7 SWITCH-OFF AND ECO MODE
To switch off the machine or set it to ECO
mode, proceed as follows:
- Simultaneously press the buttons K5
and K3 on the group GR1.
The machine switches off.
The LED L1 flashes slowly.
The mini-display shows the indication
“OF” for 10 seconds.
- Simultaneously press the buttons K5
and K3 on the group GR1.
The machine sets to ECO mode.
The LED L1 flashes quickly.
The mini-display shows the indication
“EC” for 10 seconds.
- Press the button K3 on the group GR1
to switch on the machine.
The sequence of statuses is OFF -> ECO
-> last dispensing time.
Operating on the group GR1 allows ope-
rating on the whole machine.
Operating on the groups GR2 and
GR3 allows operating on the individual
groups but not on the machine.