Sanremo D8 - Starting the Machine; Turning on the Machine; Water Filling in the Boiler; First Start-Up

D8
Starting the machine
31
STARTING THE MACHINE
6 FIRST START-UP
IMPORTANT
The first machine start-up must
be carried out by specialised
technicians authorised by the
local dealer of Sanremo.
6.1 WATER FILLING IN THE BOILER
To fill the boiler with water, proceed as
follows:
- open the water supply tap upstream of
the machine;
- open the steam supply, turning the
knob (1);
1
- power on the machine and move
the circuit breaker upstream of the
machine to ON;
- turn the switch to position “1”. The
light turns on to indicate that the circuit
is live, the display lights up and the
automatic filling starts.
OFF
ON
IMPORTANT
If automatic filling does not
take place within 120 seconds,
the machine stops and the keys
above the groups light up and
flash.
Check that the water supply tap
is open
Turn the machine off and on
again to complete the water
intake in the boiler.
6.2 TURNING ON THE MACHINE
To turn on the machine, proceed as fol-