D8
Starting the machine
34
During the machine heating phase, the
mini-display shows an animation indica-
ting that the machine is not ready and all
the LEDs on the keypads are off.
At the end of heating, the mini-display
shows “00”.
The LEDs of the keypads light up.
6.2.2 SETTING DOSES
6.2.2.1 Setting coffee doses
The doses set on the group GR1 are co-
pied to all groups.
Groups can be set independently.
Below is the procedure for setting doses:
- press the button K5 for 6/8 seconds
on the group to be programmed.
6-8 sec.
The mini-display shows the indication
“dS”.
To Next Page
Loading...
