D8
Starting the machine
35
The bottom LEDs flash to indicate the
dose programming status:
- the machine has no programmed
doses: LEDs from L1 to L4 are lit;
- the machine is programmed for 5
doses: LEDs from L5 to L7 flash;
- the machine is programmed for 7
doses: only the LED L5 flashes.
- Press the button for the dose to be
programmed.
The machine starts dispensing, the mi-
ni-display shows the elapsed time.
The LED of the selected dose remains lit
on the group.
- Press any button to end the dose.