Sanremo D8 - Page 36

D8
Starting the machine
36
The LEDs of the doses not yet program-
med light up and the mini-display shows
the time of the last dispensed dose.
The LED L5 flashes (or the lower group
of LEDs).
It is now possible to program a new
dose.
When programming is complete, wait
for the machine to save the new settings.
The groups can be programmed inde-
pendently in the same way.
The doses set on the group GR1 are co-
pied to all groups. The water dose se-
conds will be shown on the group with
the highest number.
Programming of 7 doses is only possible
with machine enabled.
6.2.2.2 Setting water doses
It is possible to set a double dose for
hot water dispensing (if the machine is
enabled).
- press the button K8 (1) once to set the
first dose of water;
- press the button K8 (1) twice to set the
second dose of water;
1