D8
Technical user menu
45
8.4 GROUP TEMPERATURE
The temperature of the dispensing groups
is set at 93°C by default.
The group temperature can be set as
shown in the table:
Buttons LED LED status
T (°C)
K1 L1 Steady ON 91
Flashing 92
K2 L2 Steady ON 97
Flashing 98
K3 L3 Steady ON 93
Flashing 94
K4 L4 Steady ON 95
Flashing 96
K6 L6 Steady ON 90°C
K7 L7 OFF Celsuis
ON
Fahrenheit
To set the group temperature, proceed as
follows:
- enter the technical user menu, see “8
Technical menu” page 42;
- press the button K2.
The mini-display shows the indication
“tG”.
The LED on indicates the set temperature
(e.g. LED L1 steady on).
The mini-display shows the correspon-
ding temperature (e.g. 91°C).
If the temperature is set in Fahrenheit sca-
le the corresponding integer is scrolled
on the mini-display with the addition of a
final F (e.g. 19->99->9F).
- Press the button corresponding to the
desired temperature:
∙ the first press of the key switches on
the LED (e.g. button K4 -> 95°C,
LED L4 is on);
∙ the second press causes the LED to
flash (e.g. button K4 with LED L4 on
-> 96°C, LED L4 flashes).
Pressing the same button consecutively
changes the status of the function in a
cyclic manner.
To set the temperature scale, see “8.3
Boiler temperature setting” page 44.
To Next Page
Loading...
